Bambu Lab A11 / 6

Bambu Lab A1

$299Pre-order

Est. delivery 2–3 weeks. Charged today, ships when it arrives.

The Bambu Lab A1 is an open-frame printer with a 256 × 256 × 256 mm build volume and a 3.5-inch touch screen.

Model

1
  • Auto calibration of Z-offset, bed level, vibration resonance and nozzle pressure for every print job.
  • Quick swap hotend that pops in and out with one clip, no tools needed.
  • Filament runout, tangle and air-printing monitoring, plus power loss recovery.
  • Silent mode with Active Motor Noise Canceling brings noise under 48 dB.
Build volume
256 × 256 × 256 mm
Motion system
Bed slinger, full-metal rails
Max toolhead speed
500 mm/s
Max acceleration
10,000 mm/s²
Nozzle
0.4 mm stainless steel included; 0.2, 0.6 and 0.8 mm optional
Max hot end temperature
300 ℃
Max build plate temperature
100 ℃
Multi-color
AMS lite, up to 4 colors
Display
3.5-inch 320 × 240 IPS touch screen
Connectivity
Wi-Fi, Bambu-Bus, Micro SD card
Dimensions / weight
465 × 410 × 430 mm, 8.3 kg net

The spec sheet rates PLA, PETG, TPU and PVA as ideal and does not recommend ABS, ASA, PC, PA, PET or fiber-reinforced filaments. Figures from Bambu Lab's published specs.

This one is on pre-order: you're charged today and it ships as soon as our inventory arrives (est. delivery 2–3 weeks). We'll email you when it's on its way, and you can cancel for a full refund any time before it ships.
See it live at KUBOT Aventura, Aventura Mall, 19501 Biscayne Blvd. Weekdays 3–9pm, weekends 9am–9pm.

Bambu Lab A1 · A1

$299